Call us at any time (904) 377-5084
Call us at any time (904) 377-5084
POOL COST IN JACKSONVILLE
How Much Does a Pool Cost in Jacksonville, FL?
(2026 Guide)
Most new inground pools in Jacksonville cost between $50,000 and $120,000 fully installed in 2026, with a typical mid-range build landing around $75,000–$95,000. Where you fall depends on four things: the pool type (fiberglass, gunite/concrete, or vinyl), the size, the finishes and features you choose, and your site conditions.
One cost that catches most Jacksonville homeowners off guard: a screen enclosure — included in the majority of Northeast Florida builds — typically adds $12,000–$30,000 on top of the pool itself.
The good news for local buyers: Jacksonville and Northeast Florida is one of the most affordable pool markets in the state, generally cheaper than South Florida or the Gulf Coast.
What a pool actually costs in Jacksonville, by type
The single biggest factor in your price is the type of pool. Here's how the three inground options compare in the Jacksonville market.
Pool Type
Vinyl liner
Fiberglass
Gunite/Concrete
Typical Jax installed cost
~$44,000–$75,000
~$55,000–$110,000
~$65,000–$120,000+
Best for
Lowest upfront cost; liner replaced every ~7–15 years
Fast install, low maintenance, great in Florida's sandy/wet soil
Fully custom shapes and sizes, longest lifespan
A few things worth knowing behind those numbers:
- Gunite (concrete) is the most customizable and durable, and it's what most high-end Jacksonville backyards are built from — but it's the priciest and takes the longest to build.
- Fiberglass is especially popular in Northeast Florida because our sandy soil and high water table make for wet, tricky digs, and a fiberglass shell installs much faster than pouring concrete. The tradeoff: you're limited to pre-made shapes and sizes.
- Vinyl liner is the cheapest to install, but the liner itself needs replacing every several years (roughly $4,000–$8,000 each time), so it can cost more over the long run.
Not sure which is right for you? No worries! See our full Gunite vs. Fiberglass vs. Vinyl comparison.
Pool cost by size
Size is the next big lever. As a rough guide, Jacksonville pools price out something like this for a mid-grade build (before major features or enclosures):
Size
Small (around 10×20–12×24)
Medium (around 14×28–16×32)
Large (18×36 and up)
Approx. range
$55,000–$75,000
$70,000–$100,000
$95,000–$150,000+
These are starting points, not quotes — the finishes and features below can move any of them substantially.
What drives your price up (or down)
Two identical-sized pools can be $40,000 apart. Here's what actually moves the number:
Screen enclosure (pool cage). The big one in Jacksonville — most local builds include one, and it adds roughly $12,000–$30,000. It's not optional for a lot of homeowners here (bugs, debris, and sun), so budget for it from the start rather than being surprised.
Decking and coping. How much patio you pour, and the material (basic concrete vs. pavers vs. travertine), can swing the total by tens of thousands.
Site conditions. Sandy soil, a high water table, tricky access for equipment, or the need to dewater during excavation all add cost — and these are common in Northeast Florida.
Spa, water features, tanning ledge. A built-in spa, waterfall, sun shelf, or fire features each add to the total.
Finish. Basic plaster is the standard; upgraded aggregate or tile finishes cost more and last longer.
Automation, heating, and lighting. Salt systems, pool heaters, LED lighting, and app-based automation are popular upgrades that add up.
Permits and equipment. Included in most turnkey quotes, but worth confirming what's in and what's not.
These are starting points, not quotes — the finishes and features below can move any of them substantially.
What budget tier fits you?
Rather than one big number, it helps to think in three budget bands. Most Jacksonville projects fall into one of these:
1. Essential — around $50,000–$75,000
A quality, well-built pool without the extras. Often a fiberglass shell or a standard-shape gunite pool, basic decking, standard finish. For homeowners who want a great place to swim without a resort price tag.
2. Custom — around $75,000–$115,000
A larger or custom-shaped pool, usually with a spa, upgraded decking and finishes, and a screen enclosure. The most popular range for Jacksonville new builds.
3. Luxury — $115,000 and up
A resort-style backyard: infinity edges or custom geometry, full outdoor living (summer kitchen, fire features), premium finishes, automation, and high-end enclosures.
What about the cost to own a pool in Jacksonville?
The build is the big number, but ongoing cost matters too. Because Jacksonville winters are mild, many homeowners keep their pools open year-round, which means steady (but manageable) maintenance rather than seasonal closing/opening. Budget for chemicals, electricity to run the pump, occasional professional service, and — if you have a vinyl pool — an eventual liner replacement.
How to get an accurate number for your backyard
Every cost guide, including this one, gives you ranges — because your real price depends on your specific yard, the pool you want, and current builder availability. The fastest way to get a real number is to get quotes from builders who work in your budget.
That's what we do. Tell us your budget range, neighborhood, and what you're looking for, and we'll match you — free — with Jacksonville pool builders who fit. No pressure, no obligation, and we're independent (we don't build pools ourselves).
Jacksonville Pool Cost FAQ
How much does an inground pool cost in Jacksonville?
Most inground pools in Jacksonville cost between $50,000 and $120,000 fully installed in 2026, with a typical mid-range build around $75,000–$95,000. Budget vinyl and small fiberglass pools start around $44,000–$55,000, while custom gunite pools with premium features can exceed $120,000.
What's the cheapest type of inground pool in Jacksonville?
Vinyl liner pools are the cheapest to install, typically $44,000–$75,000. However, because vinyl liners need replacing every 7–15 years, fiberglass often costs less over the long run despite a higher upfront price.
Why do Jacksonville pools need a screen enclosure?
Most Northeast Florida homeowners add a screen enclosure (pool cage) to keep out bugs, debris, and harsh sun, and to reduce cleaning. It typically adds $12,000–$30,000 to the total and is included in the majority of local builds, so it's worth budgeting for upfront.
Is Jacksonville a cheaper place to build a pool than South Florida?
Generally, yes. Jacksonville and Northeast Florida is one of the most affordable pool markets in the state — typically less expensive than Miami, the Gulf Coast, or high-end custom markets, due to lower labor and permitting costs.
How long does it take to build a pool in Jacksonville?
It varies by pool type and builder availability, but most inground pool builds take several weeks to a few months from permit to first swim. Fiberglass tends to be faster than gunite. See our full timeline guide for details.
Does a pool add value to my Jacksonville home?
In a warm-climate market like Jacksonville where pools can be used nearly year-round, a well-built pool is often a strong lifestyle and resale investment — though the exact value added depends on your neighborhood and the quality of the build.